home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
FishMarket 1.0
/
FishMarket v1.0.iso
/
fishies
/
151-175
/
disk_166
/
stevie
/
stevie.doc
< prev
next >
Wrap
Text File
|
1992-05-06
|
12KB
|
435 lines
STEVIE - Simply Try this Editor for VI Enthusiasts
Quick Reference Card
by
Tony Andrews And G. R. (Fred) Walter
STEVIE may be freely distributed. The source isn't copyrighted or
restricted in any way. If you pass the program along, please include all
the documentation and, if practical, the source as well.
STEVIE used to stand for 'ST Editor for VI Enthusiasts', however since this
editor is used on more machines than just ST's the acronym was changed.
Starting the Editor
-------------------
The following command line forms are supported:
vi [file ...] Edit the specified file(s)
vi -t tag Start at location of the given tag
vi + file Edit file starting at end
vi +n file Edit file starting a line number 'n'
vi +/pat file Edit file starting at pattern 'pat'
If multiple files are given on the command line (using the first form),
the ":n" command goes to the next file, ":p" goes backward in the list,
and ":rew" can be used to rewind back to the start of the file list.
Set Command Options
-------------------
The ":set" command works as usual to set parameters. Each parameter has
a long and an abbreviated name, either of which may be used. Boolean
parameters are set as in:
set showmatch
or cleared by:
set noshowmatch
Numeric parameters are set as in:
set scroll=5
Several parameters may be set with a single command:
set novb sm report=1
To see the status of all parameters use ":set all". Typing ":set" with
no arguments will show only those parameters that have been changed.
The supported parameters, their names, defaults, and descriptions are
shown below:
Full Name Short Default Description
------------------------------------------------------------------------------
vbell vb vb Use visual bell (novb for audible bell)
showmatch sm nosm Showmatch mode
wrapscan ws ws Wrapscan (searches cross file start/end)
errorbells eb noeb Ring bell when error messages are shown
showmode mo nomo Show on status line when in insert mode
backup bk nobk Leave backup in *.bak on file writes
return cr cr End lines with cr-lf when writing
list list nolist Show tabs and newlines graphically
scroll scroll 12 Number of lines to scroll for ^D and ^U
tabstop ts 8 Number of spaces in a tab
report report 5 Min # of lines to report operations on
lines lines 25 Number of lines on the screen
The EXINIT environment variable can be used to modify the default values
on startup as in:
setenv EXINIT="set sm ts=4"
The 'backup' parameter, if set, causes the editor to retain a backup of any
files that are written. During file writes, a backup is always kept for
safety until the write is completed. At that point, the 'backup' parameter
determines whether the backup file is deleted.
In environments (e.g. OS/2 or TOS) where lines are normally terminated by
CR-LF, the 'return' parameter allows files to be written with only a LF
terminator (if the parameter is cleared).
The 'lines' parameter tells the editor how many lines there are on the screen.
This is useful on systems like the ST where various screen resolutions may be
used. By using the 'lines' parameter, different screen sizes can be easily
handled. On the Amiga system window resizes are atomatically detected and
acted upon. It is suggested that one's window be larger than 2 rows and 5
columns.
File Manipulation Commands
--------------------------
:w write the current file
:wq write and quit
:x write (if necessary) and quit
ZZ same as ":x"
:e file edit the named file
:e! re-edit the current file, discarding any changes
:e # edit the alternate file
:w file write the buffer to the named file
:x,y w file write lines x through y to the named file
:r file read the named file into the buffer
:n edit the next file
:p edit the previous file
:rew rewind the file list
:f show the current file name
:f name change the current file name
:ta tag go to the named tag
^] like ":ta" using the current word as the tag
:help display a command summary
The ":help" command can also be invoke with the <HELP> key on the Atari ST
or the Amiga. This actually displays a pretty complete summary of the real vi
with unsupported features indicated appropriately.
The commands above work pretty much like they do in 'vi'. Most of the
commands support a '!' suffix (if appropriate) to discard any pending
changes.
When writing just part of the buffer, the following address forms are
supported:
addr [+- number]
where 'addr' may be one of the following:
a line number
a mark (as in 'a or 'b)
'.' (the current line)
'$' (the last line)
String Searches
---------------
String searches are supported, as in vi, accepting the usual regular
expression syntax. This was done using Henry Spencer's regular expression
library without modification. Tony Andrews added code outside the library to
support the '\<' and '\>' extensions.
Operators
---------
The vi operators (d, c, y, <, and >) work as true operators.
Tags
----
Tags are implemented.
System-Specific Comments
------------------------
The following sections provide additional relevant information for the
systems to which STEVIE has been ported.
Atari ST
--------
The editor has been tested in all three resolutions, although low and
high res. are less tested than medium. The 50-line high res. mode can
be used by setting the 'lines' parameter to 50. Alternatively, the
environment variable 'LINES' can be set. The editor doesn't actively
set the number of lines on the screen. It just operates using the number
of lines it was told.
The arrow keys, as well as the <INSERT>, <HELP>, and <UNDO> keys are
all mapped appropriately.
UNIX
----
The editor has been ported to UNIX System V release 3. This was done
mainly to get some profiling data so I haven't put much effort into
doing the UNIX version right. It's hard-coded for ansi-style escape
sequences and doesn't use the termcap/terminfo routines at all.
OS/2
----
This port was done because the editor that comes with the OS/2 developer's
kit really sucks. Make sure 'ansi' mode is on (using the 'ansi' command).
The OS/2 ansi driver doesn't support insert/delete line, so the display
updates are a little rough, but the editor is fast enough that it isn't
too bothersome. The arrow keys are NOT mapped, so they don't currently do
anything reasonable.
BSD 4.3
-------
This port was done so it could be worked on in a main-frame enviroment.
Amiga
-----
The arrow keys and the help key are supported, as is window re-sizing.
It is strongly suggested that you not try to type in console commands
(alt-esc in some keymaps, plus the appropriate other keys) since STEVIE
captures all console input. If you do type alt-esc then typing '|' will
return you to STEVIE.
Missing Features
----------------
1. Macros with support for function keys.
2. More "set" options.
3. Auto-indent.
4. Many others...
Known Bugs and Problems
-----------------------
1. The yank buffer uses statically allocated memory, so yanks of more than
5K of text will fail. If a delete spans more than 5K, the program asks
for confirmation before proceeding. That way, if you were moving text,
you don't get screwed by the limited yank buffer. You just have to move
smaller chunks at a time. All the internal buffers (yank, redo, etc.)
need to be reworked to allocate memory dynamically.
2. If you stay in insert mode for a long time (around 5K's worth of
characters, including newlines) the insert buffer can overflow.
When this happens you lose your ability to automatically undo the text just
inserted and the redo/undo/(undo of undo) buffers are reset to the
current position.
3. Several other less bothersome glitches...
Character Function Summary
--------------------------
The following list describes the meaning of each character that's used
by the editor. In some cases characters have meaning in both command and
insert mode; these are all described.
^@ The null character. Not used in any mode. This character may not
be present in the file, as is the case with vi.
^B Backward one screen.
^D Scroll the window down one half screen.
^E Scroll the screen up one line.
^F Forward one screen.
^G Same as ":f" command. Displays file information.
^H (BS) Moves cursor left one space in command mode. In insert mode, erases
the last character typed.
^J Move the cursor down one line.
^L Clear and redraw the screen.
^M (CR) Move to the first non-white character in the next line. In insert
mode, a carriage return opens a new line for input.
^N Move the cursor down a line.
^P Move the cursor up a line.
^U Scroll the window up one half screen.
^V Indicates that the next character is should be treated as entered
and not modified (used to enter control characters, etc.).
^Y Scroll the screen down one line.
^[ Escape cancels a pending command in command mode, and is used to
terminate insert mode.
^] Moves to the tag whose name is given by the word in which the cursor
resides.
^` Same as ":e #" if supported (system-dependent).
SPACE Move the cursor right on column.
$ Move to the end of the current line.
% If the cursor rests on a paren '()', brace '{}', or bracket '[]',
move to the matching one.
' Used to move the cursor to a previously marked position, as in
'a or 'b. The cursor moves to the start of the marked line. The
special mark '' refers to the "previous context".
+ Same as carriage return, in command mode.
, Reverse of the last t, T, f, or F command.
- Move to the first non-white character in the previous line.
. Repeat the last edit command.
/ Start of a forward string search command. String searches may be
optionally terminated with a closing slash. To search for a slash
use '\/' in the search string.
0 Move to the start of the current line. Also used within counts.
1-9 Used to add 'count' prefixes to commands.
: Prefix character for "ex" commands.
; Repeat last t, T, f, or F command.
< The 'left shift' operator.
> The 'right shift' operator.
? Same as '/', but search backward.
A Append at the end of the current line.
B Backward one blank-delimited word.
C Change the rest of the current line.
D Delete the rest of the current line.
E End of the end of a blank-delimited word.
F Find a character backward on the current line.
G Go to the given line number (end of file, by default).
H Move to the first non-white char. on the top screen line.
I Insert before the first non-white char. on the current line.
J Join two lines.
L Move to the first non-white char. on the bottom screen line.
M Move to the first non-white char. on the middle screen line.
N Reverse the last string search.
O Open a new line above the current line, and start inserting.
P Put the yank/delete buffer before the current cursor position.
T Reverse search 'upto' the given character.
W Move forward one blank-delimited word.
X Delete one character before the cursor.
Y Yank the current line. Same as 'yy'.
ZZ Exit from the editor, saving changes if necessary.
[[ Move backward one C function.
]] Move forward one C function.
^ Move to the first non-white on the current line.
` Move to the given mark, as with '. The distinction between the two
commands is important when used with operators. I support the
difference correctly. If you don't know what I'm talking about,
don't worry, it won't matter to you.
~ Switch case of character under cursor.
a Append text after the cursor.
b Back one word.
c The change operator.
d The delete operator.
e Move to the end of a word.
f Find a character on the current line.
h Move left one column.
i Insert text before the cursor.
j Move down one line.
k Move up one line.
l Move right one column.
m Set a mark at the current position (e.g. ma or mb).
n Repeat the last string search.
o Open a new line and start inserting text.
p Put the yank/delete buffer after the cursor.
r Replace a character.
s Replace characters.
t Move forward 'upto' the given character on the current line.
u Undo the last edit.
w Move forward one word.
x Delete the character under the cursor.
y The yank operator.
z Redraw the screen with the current line at the top (zRETURN),
the middle (z.), or the bottom (z-).
| Move to the column given by the preceding count.